FLOOR INSTALLATION TOOLS : AAA Rent-All

rental inventory event rental promotions locations faqs used equipment for sale

Home : RENTAL INVENTORY : FLOOR INSTALLATION TOOLS

FLOOR INSTALLATION TOOLS

CARPET IRON
The super low profile and ultra-narrow handle of this iron make it easier to get the seam together near the back of the iron. Dual indicator lights show both power-on and heating status. The self-cleaning teflon coated base and 12' long cord are standard features. The heavy-duty handle and riveted iron tray provide exceptional durability.

CARPET KICKER
The carpet kicker features five setting length adjustments from 17-1/2" to 21-1/2", a recessed trigger that locks in each position, and 3 replaceable nap grippers and 16 adjustable steel pins. The pin dial gives the user a visual reference of pin length. The knee kicker is simple and easy to use.

CARPET POWER STRETCHER
The easy way to tackle your carpet installation project, the power stretcher uses ratcheting power to pull your carpet firmly into place. Comes complete with push-button stretch lock, Auto-Lock tube, 3 extension tube sections, 1 transfer tube section, folding tail block and carrying case with wheels.

CERAMIC TILE CUTTER, FOR UP TO 12" TILE
This easy score and break system handles up to 12" ceramic tiles and is the most affordable way to complete your large tile floor installation project.

CERAMIC TILE CUTTER, FOR UP TO 36" TILE
This easy score and break system handles up to 36" ceramic tiles and is the most affordable way to complete your large tile floor installation project.

CERAMIC TILE SAW
Will make up to a 16" straight cut through ceramic tile. Powerful 1.5 HP mower allows you to finish your job faster and easier- don't be fooled by similar looking saws that offer only half the power. Sliding tray allows for easy, accurate cuts every time.

CERAMIC TILE SAW, LARGE
The large ceramic tile saw has the capacity to rip cut 31" tile and diagonally cuts 22" x 22" tile. The sliding water pan allows instant adjustment from small to large material for unequaled productivity and convenience. It also has spring-assisted plunge cut capacity and blade shaft lock. Provides professional results when installing larger ceramic tiles.

CERAMIC TILE STRIPPER
Unlike the random orbit-type tile stripper machines currently on the market, the ceramic tile stripper provides a direct-impulse force, which supplies adequate power to break through the high bond strengths of today�s mastics, glues and thin-set materials. Designed to enhance maneuverability, control and visibility, the ceramic tile stripper unique configuration allows users to operate electric-powered breakers in an upright position, which helps increase productivity while reducing strain on operators� knees and lower backs.

FLOOR NAILER, AIR
The air floor nailer is mallet activated to ensure the tightest floor possible and the air chamber provides for rapid cycling with 90-100 psi. It can hold up to 200 2" floor nails. Nails are sold separately in 2" length (for nailing to subfloor over floor joists), or in 1.5" length (for nailing to subfloor over concrete).

FLOOR NAILER, RATCHETING
The manually operated ratcheting floor nailer uses a cleated 1 1/2" or 2" nail to securely fasten flooring to the subfloor, and comes with a mallet. The ratcheting floor nailer is designed for nailing 3/4" hardwood tongue and groove flooring. Simply load the nails, position on your plank, and strike with the included mallet to drive your nail.

JAMB SAW
The jamb saw undercuts doors as well as jambs and moulding for flooring installations. It cuts flush to floor to underlay vinyl along walls. It is primarily used for cutting jambs and base moulding for tile and wood floor installations. Adjusts to 1-1/4" high and up to 1-3/4" deep.

SCABBLER
Scabblers use compressed air to hammer piston-mounted bits into the concrete surface roughening the concrete surface more than grinding or scarifying. The scabbler can remove up to 1/4 inch of concrete surface in a single pass. The actual production rate depends on the strength of the concrete. A typical removal rate for a machine with a 12-inch working width is 200 to 250 square feet per hour at a 1/8-inch depth. Used for breaking up blistered or spalling concrete, removing floor coatings, or roughing surface to create a bond for overlays.

TILE ROLLER
The tile roller is an all steel 100 lb roller. Typically the roller can be used on: linoleum, vinyl sheet goods, rubber tile, vinyl tile, glue-down carpet, cork tile, wood block tile, roofing systems, waterproofing membranes, and more. The tile roller's handle can be removed by unscrewing from the base for easier transport.

20 FOOT STORAGE CONTAINERS

We rent 20 foot secure storage containers. For more information, click on the link below. Or give us a call at 225-291-1356.

Click HERE.